台湾纳玛NAMA气动清废机、打卡纸机 MA-250
本机适用于印刷行业纸板、细瓦楞和普通瓦楞纸的废边清除
1、结构紧凑，采用轻巧手提式设计，使用非常方便，男女员工经简单培训均可操作
2、轻松快捷清废，效率高，比传统人力清废效率提高5-10倍，极大地缩短了交货周期
3、与锤敲清废方式相比，清废时不损伤粘结部位，废品率大幅降低，提高后道工序效率
动力源采用气动马达，安全性好
4、齿链采用高强度合金钢经过热处理工艺，硬度更高，耐磨性强，使用寿命长
5、适用纸张范围：200g/㎡-500g/㎡卡纸,单/双坑纸，互裱卡纸板
Specifications
carton waste cleaner is suitable for printing cartons,small(E-type)and common corrugated boards wastes cleaning.
carton waste cleaner
1.Suitable for printing cartons,small(E-type)and common corrugated boards’ wastes cleaning
2.The structure is compact,adopting light hand-held designer,comfortable use;only a little training can easily operate for male and female workers
3.Easily job,high effectiveness;compare with wastes-cleaning way by manhands,the efficiency can be up to 5-10 times
4.Compare with hammer’s striking,no injured the products,more less wastes;promping the post-process effectiveness
5.Adopting air motor,safety is better
6.The gear-chains use high strength alloy-steel,nice heat-treatment process,high hardness,anti-wear,longer-life
7.Board ranges:200-500gsm cartons,single/double corrugated boards and laminated cartons
型号 | MA-250B （大中小齿） |
气动马达耗气量 | 12CFM |
抓爪频率 | 2500次/分钟，4500次/分钟 |
链爪材质 | SK9,高频淬火HRC60度 |
整机重量 | 3.5kg |
特点：利用尖利齿将废纸边勾出清除、清废率提升10倍、人工清废需要3个小时、机械作业10-30分钟即可完成。
气动清废机（小齿）：用于卡纸产品的清废。
气动清废机（中齿）：用于卡纸，细坑纸瓦楞纸产品的清废。
气动清废机（大齿）：用于细坑，粗坑纸产品灰纸板的清废。
本清废机的齿链采用高强度合金钢经过热处理工艺处理，硬度极高，耐磨性强，使用寿命长，且替换方便
We have three models :
MA-250B
Large teeth for corrugated paper
MA-250
In teeth for cardboard corrugated paper
MA-450
Small teeth for cardboard
Range for the paper is 150g/²-1000g/² cardboard.
Range for double corrugated paper , double laminated corrugated paper .
High-speed running gear is cycle driven through air motor , stirp waste margin paper with sharp teeth gear.
The gear use high strength diamond compound after heat treatment , high hardness , wear resistance , long life and easy replacement .
Stripping efficiency is improved by 10 times .
Manual stripping needs hours , finished only in 10-30 minutes with stripping machine .
Easy to use , worker can operate the machine after simple training.
No damage for bonding area while strippi
广州佑能五金工具有限公司
电话：、38094502
传真：
手机：、
联系人：郭冰双、郭子强
QQ客服：【1668857930】【603720168】【1397107354】
邮箱：unopower@foxmail.com
公司网站：http://www.namatools.com
地址：广州市天河区新塘街28号祺禾商贸园B栋2322室