深圳��格瑞思电子有限公司温馨提示：因电子产品不断更新换代的特性和不同IC芯片价格频繁变动,如果需要OEM的客户最好直接联系我们,临时议价；
付款方式：
一、可以选择第三方担保交易,比如支付宝付款。
二、可以以公司通过公对公的方式转账或电汇。
三、支持个人银行转账付款,或者现金方式付款。
扩展卡由原生PCI Express 1-Lane 2.0界面扩展出2个SATA 6Gbps接口, 符合串行ATA 3.0规范,向下兼容SATA 1.5Gbps and 3.0Gbps串口设备。
功能及Specification
通用参数
符合串行ATA AHCI (Advanced Host Controller Interface) 规范 Rev 1.0
符合IDE ATA 总线管理协议 Revision 1.0
符合PCI Express 规范 Revision 2.0 并向后兼容Revision 1.0a
符合串行 ATA High Speed Serialized AT Attachment 规范 Revision 1.0a
符合串行 ATA II 规范
PCI Express 1-Lane 总线带宽达5.0 / 2.5Gbps
支持Windows 8 / Windows 7 / Vista / XP / 2000 / Server2003-2008 32/64-bit, Linux等操作系统
串行 ATA (SATA)界面
2个内置SATA 6G接口
2 个SATA设备点对点连接方式
符合Serial ATA 3.0规范
向后兼容SATA II(3.0Gbps)与SATA I(1.5Gbps)
支持启动模式
支持Native Command Queuing (NCQ)功能
支持FIS端口倍增功能(Port Multiplier )
支持SATA热插拔
Ports:4 Internal SATA 6Gb/s Ports
Compliant with PCI-Express Specification v2.0
Compliant with Serial ATA Specification 3.0
PCI-Express x2 Interface is Compatible with PCI-Express x4, x8, and x16 slots
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
Supports Native Command Queue (NCQ)
Compatible with SATA 6G, 3G and 1.5G Hard Drives
Supports Port Multiplier* FIS Based Switching or Command Based Switching
*External and internal SATA ports not true Port Multiplier (Not able to see all individual drives)
Does not support Hardware RAID.
阵列卡上设计两个LED指示灯插针,一个接主板HDD插针上,一个接机箱前面板HDD指示灯,这样都能显示阵列卡与主板设备读写状态,可以使用阵列卡内置SATA接口
Specification
符合 PCI Express 规范Revision 2.0并向下兼容Revision 1.0a
4-Lane PCI Express 2.0总线带宽达到10.0Gbps,充分发挥SATA3代硬盘或SSD固态硬盘的传输性能
支持阵列卡启动
支持SATA 3.0规范 (传输率达6Gbps),向下兼容SATA-II (3Gbps) and SATA-I (1.5Gbps) 规范
支持Native Command Queue (NCQ) 和端口倍增功能( Port Multiplier)
支持SATA设备热插拔
支持 RAID 0, 1, 10 及JBOD阵列模式
支持SSD与HDD组建混合阵列,提高系统性能
HyperDuo 模式支持安全模式 (Mirrored Protection)与容量模式 (Cost-Optimized)
系统要求
Windows 8 / 7 / Vista / XP / 2000 / Server2003-2008 32-/64-bit, Server 2008 R2 64bit, Linux 及Mac OS操作系统
具备PCI-Express 2X的PCI-e插槽(可连接于PCI-E 4x,8x,16x)
PCI-e 2.0 SATA 6Gbps Hardware RAID Controller
Connections:
4 Internal SATA Ports
Built-in RAID/HyperDuo Quick Setup Screens on BIOS
2-lane PCI-e 2.0 Interface Supports Communication Bandwidth up to 10.0Gbps
Compliant with PCI-e 2.0 Base Specification
Unique Hard Drive Activity LED Indicator Circuit Design: Blinds when there is Read/Write Activity
BIOS on board Supports OS Booting
SATA Interface:
Four SATA 6.0Gbps Ports
Compliant with Serial-ATA Specification 3.0
Supports Communication speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Compatible with SATA-III (6Gbps), SATA-II (3Gbps), SATA-I (1.5Gbps) Hard Drive and SSD\'s
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i
Supports HyperDuo Modes, HDD + SSD
Supports RAID 0, 1, 10, and JBOD
Two HyperDuo Modes:
Safe Mode (Mirrored Protection)
Capacity Mode (Cost-optimized)
Supports Native Command Queue (NCQ)
Supports SATA Port Multiplier FIS Based Switching or Command Based Switching
Supports SATA Port Hot-Plug
Note:
Mac Pro users will not be able to use RAID POST utility